What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 16.06.2025 12:21

It seems Mohan does not understand the difference between a comment and an Answer.
The MOV will conduct when the voltage exceeds 50% of line voltage.
These are simplified answers to the original question, and does not change anything I wrote above.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
The bolt then partially travels down the line to your home.
The other is “what does a “fuse” do?”
what exactly is a ‘surge’ protector?
2024–10–14 [Omar Gharbi Omar Gharbi ]
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
but this device (an Inductor) … impedes the rapid changes in the current.
What are some common historical misconceptions?
First Sentence:
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
What does a fuse do?
Have you ever accidentally found out that you were about to be fired?
But… the neutral is now “floating” because of the 1 ohm resistance.
One is “what exactly is in a ‘surge protector’ ? ”
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
This one hit behind the barn.
a photo is worth a thousand words.
So, the voltage could go up to 500 volts, and the fuse will not open up.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
Barnstars:
Now when you have a certain ac resistance, then a current flows in a loop.
What would you do if you found out that someone had broken into your home while you were sleeping?
In schematic diagrams this is the symbol for a fuse:
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
Edit 2024–10.
What is it like to be a Christian in Iran?
Because the load is inductive, the current lags the voltage.(by a bit).
For this case there are devices called Metal oxide varistors (MOV).
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
A fuse is a non-resetable over current circuit protector.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
This is where the MOV conducts again, and dissipated the energy.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
At least they know the answer if they wanted it.
Do leftists understand why young men are becoming more right-wing?
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
He then describes Rainy Season and Lightning.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
There are three different concepts here that are getting confused.
Here is a simplified AC power diagram.
nine
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
2024–10–16 [ OO OLAOYE OYEBODE ]
What are you struggling with in your life? What would you like to have instead?
The third is lightning and “how it gets conducted into a home.”
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
This is 'the assistant's answer'
but I think this circuit , shows a few more pieces.
the problem then depends on "how fast does the fuse operate?".
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
(Dc diagram shown, AC is similar).
It also is a device that limits the change in current flow.
[old diagram got deleted by accident]
2024–10–10[John johnson John Johnson ]
so, what happens?
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
An AC voltage/ current source, and an ac inductive load.
This device then solves the entire problem.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
He then asserts :
He then describes the function of a fuse.
At one ohm, the resistor has a maximum of 1 watt power.
These devices are installed between the “hot” and “neutral” and protective ground.
A circuit breaker is similar, but is resettable.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
Upvotes:
There are two important concepts here.
One
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
This is where this question deviates from being a 'generic' question, and becomes more specific.
But it can get overloaded, and no longer works.
I post the exact comment here.
eight
What is lightning?
[image of Common-mode choke]
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.